Advertisement
Quick Links
Installation Guide
Insight Managed
WiFi 6 AX1800
Dual Band Access Point
Model WAX610
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
Package contents
Access Point Model WAX610
Mounting bracket with screw holes for
Mounting bracket without screw holes for
Note:
Depending on the product ordered,
the package might not include a power
Installation options
Ethernet
space between the access point and the
Mount to a solid wall
the provided anchors and screws, which
screw protruding from the wall so that
Line up the holes on the bottom of the
access point with the screws in the wall
Mount to a T-bar
on the bottom the access point until it
Note:
Align the rectangular protruding part of
Mount to a solid ceiling
Using the anchors and screws provided,
the front of the access point facing the
the bottom of the access point with the
Slide the access point into the bracket
Note:
locking tab toward the ceiling and slide the
Side view
Locking tab
Advertisement
Related Manuals for NETGEAR WAX610
Summary of Contents for NETGEAR WAX610
- Page 1 WiFi 6 AX1800 Mount to a solid wall Dual Band Access Point the front of the access point facing the Access Point Model WAX610 Model WAX610 the bottom of the access point with the Mounting bracket with screw holes for...
- Page 2 Solid green (one of two DC power connector Solid amber 2.4 GHz WLAN Solid green 1. Register the access point in NETGEAR Insight Support and Community 5 GHz WLAN Solid green Visit questions answered and access the Make sure that the switch to which the access point is connected is connected to the...