Change The Vlan Id For A Wifi Network - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
6. Under Band Steering / 802.11 k/v, select one of the following radio buttons:
• Disable. Band steering is disabled for the VAP. This is the default setting.
• Enabled. Under certain channel conditions, the access point steers WiFi devices
that are dual-band capable to the 2.4 GHz or 5 GHz band of the VAP.
7. Click the Apply button.
Your settings are saved.

Change the VLAN ID for a WiFi network

The VLAN ID for a WiFi network is not the same as the 802.1Q VLAN ID that is used for
the wired network (see Set the 802.1Q VLAN and management VLAN on page 131).
CAUTION: Before you change the VLAN ID, be sure that the VLAN is configured on
the network switch and the DHCP server and that the access point and its clients can
get IP addresses over the new VLAN.
To change the VLAN ID for a WiFi network:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 37.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
Manage the Basic WiFi Features 69 User Manual