Set Bandwidth Rate Limits For A Wifi Network - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
To change the MAC ACL policy, MAC addresses in the ACL, or both, click the
link next to the group. For more information, see Manage local MAC access
control lists on page 111.
• Select the Radius MAC ACL radio button.
This option functions only if you set up a RADIUS server (see Set up RADIUS
servers on page 124).
9. Click the Apply button.
Your settings are saved.

Set bandwidth rate limits for a WiFi network

You can set rate limits for the upload and download bandwidths for devices that are
connected to a WiFi network. The minimum bandwidth rate is 64 Kbps, the maximum
bandwidth rate is 1024 Mbps. You can set one rate for the upload bandwidth and
another rate for the download bandwidth.
Note: Before you set bandwidth rate limits, check the Internet speed of the access
point (see Check the Internet speed on page 209).
To set bandwidth rate limits for devices that are connected to a WiFi network:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 37.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
Manage the Basic WiFi Features 75 User Manual