Enable Or Disable Url Tracking For A Wifi Network - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
6. Under 802.11w (PMF), select one of the following radio buttons:
• Mandatory. Requires devices to use PMF. Devices that do not support PMF
cannot connect to the WiFi network. If you select WPA3 Personal authentication
or WiFi enhanced open authentication, PMF becomes mandatory automatically.
• Optional. Lets the access point automatically activate PMF based on whether
devices can support PMF.
• Disable. PMF is disabled for the WiFi network.
7. Click the Apply button.
Your settings are saved.
Enable or disable URL tracking for a WiFi
network
You can enable the access point to track all URLs that are requested by WiFi clients that
are connected to a WiFi network (SSID or VAP). This feature is disabled by default, but
you can enable it.
For information about how to view the tracked URLs per SSID or per WiFi client, see
View or download tracked URLs on page 181.
To enable or disable URL tracking for a WiFi network:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 37.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
Manage the Basic WiFi Features 71 User Manual