View Wifi And Ethernet Traffic, Traffic And Arp Statistics, And Channel Utilization - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
• Device Type. The type of device that the client is.
• Mode. The WiFi mode of the connection.
• Status. The security status of the connection.
• Idle Time. The time that the client remained idle.
• Assoc Time Stamp. The time that is associated with the information on the
Detailed Client Information page.
13. If you opened the Detailed Client Information page, click the Close button.
The Detailed Client Information page closes.
14. To display the most recent information, click the Refresh button.
View WiFi and Ethernet traffic, traffic and ARP
statistics, and channel utilization
To view WiFi and Ethernet (wired LAN) traffic, traffic statistics, and channel
utilization:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 37.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4. Scroll down to the Hours Trend pane at the bottom of the Dashboard page.
Monitor the Access Point and the
Network
179 User Manual