NETGEAR WAX610 User Manual page 233

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
Table 3. Factory default settings (Continued)
Feature
DHCP client
NTP client
Spanning Tree Protocol
Network integrity check
IGMP snooping
802.1Q VLAN
Management VLAN
Syslog
Ethernet LLDP
UPnP
LEDs
WLAN settings for an individual WiFi network (SSID or VAP)
Broadcast SSID
VLAN ID (for WiFi clients)
Network authentication
802.11w (PMF)
Broadcast schedule
Radio band
Band steering
WiFi client isolation
URL tracking
DHCP offer broadcast to
unicast
Captive portal
MAC ACL
Rate limit
Factory Default Settings and
Technical Specifications
Default Setting
Enabled so that the access point receives an IP address from a DHCP server or router
in the network.
Enabled
Disabled
Disabled
Disabled
Untagged VLAN with VLAN ID 1
VLAN ID 1
Disabled
Enabled
Enabled
All enabled
Enabled
1
WPA2 Personal (which is WPA2-PSK)
The nonconfigurable data encryption for WPA2 Personal is AES
Disabled
Always on
Both enabled
Disabled
Automatic band steering includes automatic 802.11k RRM and automatic 802.11v
WiFi network management.
Disabled
Disabled
Enabled
None
None assigned
None
233 User Manual