Gauge Wheel Assembly - Folding Model Wing/Rigid Model Single - Landoll SOIL MASTER II 1200 Series Operator's Manual

3-4 GAUGE WHEEL ASSEMBLY - FOLDING MODEL WING/RIGID MODEL SINGLE

3-4.1 Install left and right gauge wheel arm as-
semblies on wing or main frame using pivot
pin, 1/2-13 x 2" hex head cap screw and hex
lock nuts (See Figure 3-4).
Figure 3-4 Gauge Wheel Assembly
Folding Model Wing/Rigid Model Single
3-4.2 Mount tires and wheels on hubs with lug
bolts provided in hub. Tighten wheel bolts
evenly to assure proper alignment of wheels.
NOTE: An 11L x 15 10 ply implement rib tread
tire should be used. Inflate tires to manufactur-
er's recommendation.
3-7