ASSEMBLY INSTRUCTIONS
Gauge Wheel Assembly Center
IMPORTANT
Read all safety precautions at the front of the section
before attempting any of the following procedures.
Do not attempt to lift heavy parts (such as the
pull hitch) manually. Use a hoist or a fork lift to
move these parts into position.
3-6
WARNING
1. Remove the shipping u-bolts and nuts from front of
the gauge wheel extension mounts
2. Attach the gauge wheel assemblies to the front of the
center frame with 3/4 x 5-1/2 bolts and 5/8 locknuts.
3. Connect the radius rod assembly to the front of the
gauge wheel lift tube with the installed 1 x 7-1/2 bolts
and 1 locknut. Connect the front of the radius rod
assembly to the top of the gauge wheel links with 1 x
7-1/2 bolt and 1 locknut. Initially set the radius rod
assembly to 21" centers.
4. Install 6-bolt tire/wheel assemblies on the gauge
wheel assemblies.
See Figure
3-3.
F-1090-1120