Gauge Wheel Assembly - Folding Model Frame/Rigid Model Dual - Landoll SOIL MASTER II 1200 Series Operator's Manual

3-3 GAUGE WHEEL ASSEMBLY - FOLDING MODEL FRAME/RIGID MODEL DUAL

3-3.1 Install gauge wheel arm assemblies to
main frame using pivot pin, 1/2-13 x 2" hex
head cap screw, and hex lock nuts (See Fig-
ure 3-3).
3-6
Figure 3-3 Gauge Wheel Assembly
Folding Model Frame/Rigid Model Dual
3-3.2 Mount tires and wheels on hubs with lug
bolts provided in hub. Tighten wheel bolts
evenly to assure proper alignment of wheels.
NOTE: 11L x 15 10 ply implement rib tread tires
should be used. Inflate tires to manufacturer's
recommendation.