1.1.5
Auxiliary Power Supply Unit
Fig. 9 Auxiliary power supply
The primary task of the auxiliary power supply (+12 V) is to provide power to the additional
control components in the rack. The required redundancy of this auxiliary voltage is gener-
ated via the exciters, which also output a +12 V current.
The following modules are powered by the auxiliary power supply:
Rack controller
CAN bus interface of the amplifiers
Switching relay in the power distribution
RF rectifier/directional coupler when the standby transmitter is active
2098.0188.72
Chapter 2
- 2.9 -
Design and Characteristics
E-1