R&S N 8000 Series System Manual page 108


External fan to

External dummy antenna to
Suitably adapted dummy plugs are located at the points provided for the purpose.
1. Take the required dummy plug from the power distribution board.
2. Connect the cable of the external device to the plug connector.
3. Put the plug connector back into the power distribution board.
Fig. 14 Power distribution board with dummy plugs
2098.0188.72
Chapter 3
X33 (see section "Connection of External Backup Fan")
X41 (see section "Connecting Dummy Antenna")
- 3.18 -
Installation
E-1