5. Select NetCCU > Status > Tx Status.
The Tx Status window opens.
6. Check the status of the warning and fault indicators.
If a transmitter is ready to operate, no warnings or faults will be signaled.
3.1.2
Checking Exciter Status Display
1. Select Exciter A/B ATSC > Status.
The Status window opens.
2. Check the status of the warning and error indicators.
If a transmitter is ready to operate, no warnings or errors will be signaled.
3.1.3
Checking Output Stage Status Display
1. Select Outputstage > Status > OS Status.
The OS Status window opens.
2098.0188.72
Chapter 4
- 4.27 -
Commissioning
E-1