Setting Transmitter Frequency - R&S N 8000 Series System Manual

4. Set Nonlinear Correction to Off.
The nonlinear precorrector path is deactivated.
The two precorrector paths must be switched on again before precorrection is carried out.
Note
2.5.4

Setting Transmitter Frequency

1. Select Exciter A ATSC > RF > Synthesizer.
The RF > Synthesizer window opens.
2. Make the required settings for transmitter frequency and reference source.
The table below describes the adjustable parameters in detail:
Setting item
Frequency
2098.0188.72
Chapter 4
Explanation
Setting of the pilot frequency
- 4.15 -
Commissioning
E-1