Setting Transmitter Type - R&S N 8000 Series System Manual

Notes
– Manual settings for remote connection should only be entered in offline mode (context
menu: Edit Offline) and then activated with Submit Changes (context menu).
– The IP address must not be in the same network as the front
– To allow automatic integration in a network (DHCP Client activated), the network must
contain a DHCP server.
2.4

Setting Transmitter Type

 Select NetCCU > Setup > TX Setup.
The Tx Setup window opens.
You can use the Tx Setup window to make system-specific settings and to define standby
behavior.
The table below describes the adjustable parameters:
Function
Tx Mode
ATV Mode
2098.0188.72
Chapter 4
Explanation
Used to select the transmitter standard
– NoExciter: R&S NetCCU800 is operated as a standalone instrument
(e.g. in combination with the DVB-T receiver module option)
– Multi: Both exciters in a transmitter use different standards
– FM: Analog sound broadcasting standard
– ATV: Analog TV standard
– ATSC: Digital TV standard (USA)
– DAB: Digital audio broadcasting standard
– DVB: Digital TV standard (Europe)
– DTMB: Digital TV standard (South America, Asia, Europe)
– MediaFLO™: Digital TV standard (USA)
– ISDB-T: Digital TV standard (Brazil, Japan)
Selection only possible if ATV is set under Tx Mode
– Comb Single: Vision signal and sound signal are transmitted via one
amplifier (same channel) (single = 1 sound carrier)
– Comb Dual: Vision signal and sound signal are transmitted via one
amplifier (same channel) (dual = 2 sound carriers)
- 4.9 -
Commissioning
ETHERNET interface.
E-1