1.1.4
Power Distribution Board
Fig. 8 Power distribution board
The power distribution board is directly connected to the automatic line fuses and contains
transmitter-internal cables, which are hard-wired, as well as transmitter-external compo-
nents (customer interfaces), to which you can connect external equipment.
The appropriate dummy plugs are part of the transmitter and are located at the assigned
Note
positions.
The following equipment is or can be connected to the power distribution board:
R&S NetCCU800
Exciters A/B
Fans
External fan (switched phase for controlling an external contactor)
External dummy antenna (switched phase for controlling an external contactor)
RF loop
External absorber fault (system absorber)
Overcurrent (external cooling)
Connector for rack controller
2098.0188.72
Chapter 2
- 2.8 -
Design and Characteristics
E-1