Table of Contents
Advertisement
7-PIN
4-PIN
CIRCUIT
CONN
TOWER
1
D
GROUND
2
WORK LAMPS
3
B
LEFT FLASHING
& TURN
4
STOP LAMPS
5
A
RIGHT FLASHING
& TURN
6
C
TAIL LAMPS
7
SWITCHED
POWER (12V)
7 PIN/4 PIN 120" HARNESS
m2510 harness wire designations
Electrical Installation
NOTE
See Figures 2-1 - 2-3 for light bracket placement.
1. Attach left and right light brackets with reflectors to
frame using warning light bar, 1/2-13 x 7-1/2 hex
head cap screws and hex lock nuts (See Figure 3-5.)
2. Attach ag amber single LED lamps to light brackets
using 1/4-20 x 1-1/4 hex head cap screws and hex
lock nuts.
3. Attach left tail light mount to frame assembly using
u-bolt and 5/8-11 flange head serrated nuts.
4. Attach right tail light mount and ag flasher control
module to frame assembly using u-bolt and 5/8-11
flange head serrated nuts. Be sure that the control
module is set so that the 4 pin connector faces the
right side of the machine.
5. Attach reflector assemblies and ag red single LED
lamps to tail light mounts using 1/4-20 x 1-1/2 hex
head cap screws and hex lock nuts.
WIRE
COLOR
GROUND
BLACK
YELLOW
RED
GREEN
BROWN
BLUE
Figure 3-6: Harness Wire Designations
Make sure lights are positioned for maximum
visibility from the rear.
6. Install the LED warning light harness to the frame.
7. Attach 7 pin/4pin 120" harness to frame. Connect 4
8. Insure that the harnesses are clear of any moving
9. Install the stor-away holder bracket on bolt in coulter
ASSEMBLY INSTRUCTIONS
1
2-PIN
3-PIN
TOWER
TOWER
BLACK
LEFT TURN
WHITE
A
GROUND
BROWN
TAIL
YELLOW
LEFT TURN
GREEN
B
RIGHT
RED
RIGHT
LED WARNING LIGHT HARNESS
IMPORTANT
Connect 2 pin and 3 pin ends to each of the warning
lights. Connect 6 pin to the ag flasher control module.
pin end to the ag flasher control module.
parts and secure the harnesses with tie wraps
provided.
clamp plate and assemble harness stor-away to
bracket with 1/4-20 x 3/4 hex head cap screws and
hex lock nuts.
2
3
4
6-PIN
3-PIN
2-PIN
SHROUD
TOWER
TOWER
C
A
A
A
B
B
B
C
D
E
C
F
5
A
B
3-9
Advertisement
Table of Contents
