OPERATION AND MAINTENANCE
m2510-hitch
Tractor Preparation
The 2510 Series In-Row Ripper may be used on tractors
equipped with category II or III three-point hitches. Before
attaching the In-Row Ripper, prepare the tractor as
follows:
The rear tractor tires should be inflated equally and
ballast added according to the tractor operator's manual.
For mounted type models, install front end weights as
needed on tractor to maintain stability.
4-2
CAT II HITCH
CAT III HITCH
Figure 4-1: 3 Point Hitch Setup
F-729-0913 Edition