40/42
Bosch Rexroth AG
12 Removal and replacement
To ensure the accuracy of the product after replacement of assemblies (e.g. Ball Rail Systems, carriage, frame,
etc.), such assemblies should only be removed and replaced by Bosch Rexroth.
12.1
Removing the drive
Removal is the reverse of the 6.6 section.
Be sure to observe the safety instructions in that section.
13 Disposal
The Precision Module is constructed from various materials: aluminum, steel, plastics, grease and possibly
electronic components.
NOTICE
Environmentally hazardous materials can pollute the environment if not disposed of properly.
Environmental pollution.
Collect any leaking lubricant and dispose of it properly.
f
The product and its components should be disposed of properly and in compliance with all applicable
f
national and international guidelines and laws.
14 Technical data
For technical data ! catalog.
Precision Modules PSK | R320103170/2022-10