Power Amplifier Replacement - Fujitsu M2361A Customer Engineering Manual

6.6.8 Power amplifier replacement
(1) Removal
CD
Remove the 4 screws "A" holding the front panel and then remove it.
CD
Remove the connectors (CN01-06) and FG wire that go out from the
power amplifier PCB.
Q)
Remove the 2 screws "B" holding the right side bracket and then
remove it.
QD
Remove the connectors (eN31, 33) that go out from the display panel
PCB.
CD
Pullout the 2 nylon latches and remove the power amplifier.
(2) Installation
CD
Follow, in reverse order, the procedures for removal.
CD
Ensure that the power amplifier is correctly seated in the PCB
guides.
B03P-4825-0002A •••
Ol
6 - 15