Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu ESPRIMO E4xx
Summary of Contents for Fujitsu ESPRIMO E4xx
- Page 1 System Operating Manual ESPRIMO E4xx / E5xx...
- Page 2 Thank you for buying an innovative product from Fujitsu. Latest information about our products, useful tips, updates etc. is available on our website: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: •...
- Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2013. All rights reserved. Publication Date 02/2013 Order No.: A26361-K1185-Z320-1-7619, edition 1...
- Page 5 ESPRIMO E4xx / E5xx Operating Manual Your ESPRIMO Important notes Ports and operating elements Getting started Operation Problem solutions and tips System expansions Technical specification Index...
- Page 6 Trademarks Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited or its subsidiaries in the United States of America and other countries. Kensington, MicroSaver and K-Slot are registered trademarks of ACCO Brands.
-
Page 7: Table Of Contents
The device cannot be switched off with the ON/OFF switch ......28 Fujitsu... - Page 8 Index ................. . 56 Fujitsu...
-
Page 9: Your Esprimo
DVD. You can of course also print out a copy of the manual if you prefer. Validity of the Reference Manual This Reference Manual is valid for the following systems: • ESPRIMO E410 • ESPRIMO E420 • ESPRIMO E520 Fujitsu... -
Page 10: Notational Conventions
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:... -
Page 11: Important Notes
If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. Fujitsu... -
Page 12: Cleaning The Device
Use disinfectant wipes to clean the keyboard and the mouse. Energy saving, disposal and recycling Disposal Energysaving Recycling Drivers& UtilitiesDVD User DocumentationDVD You can find information on these subjects on the "Drivers & Utilities" DVD or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Fujitsu... -
Page 13: Ce Marking
Explanation: CE nnnn (!) ; nnnn defines the type of CE marking and the exclamation mark indicates a device with radio components. You can find more information and declarations of conformity on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates". This equipment can be used in the following countries: Belgium... -
Page 14: Fcc Compliance Statement
Fujitsu is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu. The correction of interferences caused by such unauthorized modification, substitution or attachment will be the responsibility of the user. -
Page 15: Ports And Operating Elements
Front 1 = USB ports 5 = ON/OFF switch 2 = Headphone port 6 = Optical drive (optional) 3 = Microphone port 7 = Insert/eject button (CD/DVD) 4 = 3 inch module bay Fujitsu... -
Page 16: Rear
Ports and operating elements Rear 2 = Alternating voltage socket (AC IN) 1 = Slot covers Fujitsu... -
Page 17: Getting Started
Drives and boards If you have received drives or boards with your device, please do not install them until after first-time setup. How to install drives and boards is described in the "System expansions", Page 31 chapter. Fujitsu... -
Page 18: Setting Up The Device
A minimum distance of 200 mm / 7.87 inch from the device must be observed for ventilation areas. Do not expose the device to extreme ambient conditions (see "Technical specification", Page 55, "Ambient conditions"). Protect the device against dust, humidity and heat. Fujitsu... -
Page 19: Vertical Operating Position (Optional)
Connecting the device to the mains supply Mainsadapter ► Connect the power cable to the device (1). ► Plug the power plug into a grounded mains outlet (2). ► Switch the device on with the main switch at the rear (3). Fujitsu... -
Page 20: Switching On For The First Time: Installing The Software
Plan a reasonable amount of time for this, as this process must not be interrupted. You may need the licence number for Windows during the installation. The licence number is located on a label on your device. Fujitsu... -
Page 21: Switching On Monitor And Device
Help in your operating system. You will find more information on the system, as well as drivers, utilities and updates on the "Drivers & Utilities" DVD and on the Internet at "http://www.fujitsu.com/fts/support". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". -
Page 22: Connecting External Devices
► Switch off all affected devices. Cable, ► Remove all power plugs from the grounded mains outlets. ► Unplug all data communication cables from the appropriate sockets. ► Disconnect all of the cables from the device and from the external devices. Fujitsu... -
Page 23: Ports On The Device
The values for the monitor current consumption can be found in the technical data on the monitor or in the operating manual for the monitor. ► Depending on the configuration level of your device, plug the monitor power cable into the grounded mains outlet. Fujitsu... -
Page 24: Connecting The Mouse
► Plug the rectangular connector of the keyboard cable into the rectangular socket on the underside or on the rear of the keyboard. ► Plug the round plug of the keyboard cable into the keyboard port on the device. Keyboard, ► Switch your device on again. Fujitsu... -
Page 25: Connecting External Devices To The Serial Interface
To ensure the transmission capacity of USB 2.0, the cable from the external USB device to the USB port of your device must not be longer than 3 m / 118,11 inch. Fujitsu... -
Page 26: Operation
The main switch and the ON/OFF switch do not disconnect the device from the mains voltage. To completely disconnect from the mains voltage, remove the power plug from the power socket. ► If necessary, switch the monitor off (see the operating manual for the monitor). Fujitsu... -
Page 27: Indicators On The Device
The indicator lights up when the hard disk drive of the device is accessed. Drive indicator The indicator lights up when the CD-ROM or DVD drive in the device is accessed. You must never under any circumstances remove the CD/DVD while the indicator is lit. Fujitsu... -
Page 28: Keyboard
With some keyboards the ON/OFF switch can only be used with an ACPI (Advanced Configuration and Power Management Interface). Otherwise the key is inoperative. The mainboard must support this function. Keys, Keys, Keys, Enter key confirms the highlighted selection. The Enter key is also referred to as the "Return" key. Fujitsu... -
Page 29: Settings In Bios Setup
In BIOS Setup, you can set the system functions and the hardware configuration of the device. When the PC is delivered, the default entries are valid (see "BIOS Setup" manual or manual for the mainboard). You can customise these settings to your requirements in the BIOS Setup. Fujitsu... -
Page 30: Property And Data Protection
Security Lock. Lead-sealing The casing can be sealed to prevent it being opened by unauthorised persons. To do this, feed the sealing chain through the holes (1) and seal the chain with the lead seal. Fujitsu... -
Page 31: Problem Solutions And Tips
► For further clarification of the problem, contact the Service Desk for your country (see the Service Desk list or visit the Internet at "http://support.ts.fujitsu.com/contact/servicedesk"). When you do this, please have ready the identity number and serial number of your system. -
Page 32: The Device Cannot Be Switched Off With The On/Off Switch
► Restart the system. Incorrect setting for the monitor ► Press while the system is booting. ► Start the system in Safe Mode. ► Set up the monitor as described in the documentation for your operating system and monitor. Fujitsu... -
Page 33: No Mouse Pointer Displayed On The Screen
(see "Replacing the lithium battery", Page 54). Error messages on the screen Error messages and their explanations are provided: • in the technical manual for the mainboard • in the documentation for the programs used Fujitsu... -
Page 34: Installing New Software
You will find the instructions for restoring the contents of the hard disk in the "Recovery Guide" manual. Tips Topic Out of system resources ► Close unnecessary applications. ► Run the applications in a different order. Other manuals Further manuals are provided as PDF files on the "Drivers & Utilities" DVD. Fujitsu... -
Page 35: System Expansions
An update of the BIOS may be required for a system expansion or hardware upgrade. Further information can be found in the BIOS help section or if necessary in the Technical Manual for the mainboard. Fujitsu... -
Page 36: Information About Boards
The equipment and tools you use must be free of static charges. • Only touch or hold the boards by the edge or, if present, at the areas marked green (Touch Points). • Never touch pins or conductors on boards fitted with ESDs. Fujitsu... -
Page 37: Opening The Casing
The device must not be in the energy-saving mode! ► Remove any plugged-in wires which are in the way. ► Loosen the screws (1). ► Pull the cover a small distance in the direction indicated by the arrow (2) and remove it (3). Fujitsu... -
Page 38: Removing The Front Panel
System expansions Removing the front panel ► Lift the locking lugs on the front panel (1). ► Fold the front panel in the direction of the arrow (2) and remove it from the casing. Fujitsu... -
Page 39: Close The Casing
Securing the front panel ► Place the front panel with the three lower hooks in the front lower guide openings on the casing. ► Fold the front panel in the direction of the arrow (1) until the catches (a) engage. Fujitsu... -
Page 40: Reattaching The Cover
System expansions Reattaching the cover ► Place the cover on the casing (1) and push it into place in the direction indicated by the arrow (2). ► Fasten the screws (1). ► Connect the cables to the device. Fujitsu... -
Page 41: Removing The Drive Carrier
► Slide the drive cage in the direction of the arrow (2) until the guides (a) are the same height as the corresponding openings in the casing. ► Use the plastic handle to lift the drive cage out of the casing (3). Fujitsu... -
Page 42: Installing The Drive Cage
► Push the drive cage into the casing in the direction of the arrow (2). ► Connect the cables to the drive cage. ► Secure the front panel on the casing again (see "Securing the front panel", Page 35). ► Close the casing (see "Close the casing", Page 35). Fujitsu... -
Page 43: Installing And Removing Drives
"Non-accessible drives" are for example hard disk drives. Removing and installing accessible drives The number of screws used to attach the drives varies according to the type of drive fitted and may not necessarily match the depiction below. Fujitsu... - Page 44 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu...
- Page 45 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu...
- Page 46 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu...
- Page 47 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu...
- Page 48 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu...
- Page 49 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu...
-
Page 50: Removing A Hard Disk Drive
"Removing the front panel", Page 34). ► Remove the drive cage (see chapter "Removing the drive carrier", Page 37). ► Disconnect the cables from the mainboard. ► Undo the screw (1). ► Take the hard disk drive cage out of the casing (2). Fujitsu... - Page 51 It may be necessary to modify the entry for the drive in the BIOS Setup. If you are not planning to install a new hard disk drive, secure the screws in the threaded bores on the underside of the hard disk drive cage so that they are not lost. Fujitsu...
-
Page 52: Installing A Hard Disk Drive
► Remove the drive cage (see chapter "Removing the drive carrier", Page 37). ► Take the new hard disk drive out of its packaging. ► Place the hard disk drive cage on the hard disk drive (1). ► Fasten the screws (2). Fujitsu... - Page 53 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu...
-
Page 54: Installing And Removing Heat Sinks
► Fasten the screws (2). ► Connect the fan cables to the mainboard. ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). Fujitsu... -
Page 55: Assembling And Dismantling Low-Profile Units
Removing a slot cover ► Open the casing (see "Opening the casing", Page 33). ► Undo the screw (1). ► Pull the slot cover out of the slot (2). Fujitsu... -
Page 56: Installing A Board
PCI board documentation. Removing boards ► If necessary, disconnect the cables which are connected to the board. ► Loosen the screw (1). ► Pull the board out of the slot (2). ► Place the board in suitable packaging. Fujitsu... -
Page 57: Reinstalling A Slot Cover
"Close the casing", Page 35). Processor, replacing ► Open the casing (see "Opening the casing", Page 33). Processor,replacing ► Upgrade the processor according to the description in the manual for the mainboard. ► Close the casing (see "Close the casing", Page 35). Fujitsu... -
Page 58: Replacing The Lithium Battery
► Press the catch in the direction of the arrow (1). The battery jumps out of the holder slightly. ► Remove the battery (2). ► Push the new lithium battery of the identical type into the holder (3) and press it down until it engages. Fujitsu... -
Page 59: Technical Specification
Clearance required to ensure adequate ventilation: without air vents min. 10 mm / 0.39 inch with air vents min. 200 mm / 7.87 inch The data sheet for this device provides further technical data. The data sheet can be found on our website "http://www.fujitsu.com/fts". Fujitsu... -
Page 60: Index
16–17 switching on for the first time 16 Data protection 26 Interfaces 19 Device indicators 23 Device drivers, Keyboard 24 serial interface 21 Keyboard port 19 Device, keyboard shortcuts 25 anti-theft protection 26 Keyboard shortcuts 24 lead-sealing 26 Fujitsu... - Page 61 Safety information 7 Microphone port 19 Security Lock 26 Monitor Security measures 26 connecting 19 Serial interface 19, 21 Monitor port 19 Serial interface, Monitor, connecting devices 21 switching off 22 settings 21 switching on 22 Servicing 31 Mouse port 19 Fujitsu...
- Page 62 System settings, USB port 20 BIOS Setup 25 USB port, System unit, see Device 8 connecting devices 21 connecting keyboard 20 connecting the mouse 20 User Documentation DVD 8 Transportation 7–8 Video workstation 14 Universal Serial Bus 19 Upgrades Fujitsu...