Table of Contents
Advertisement
2.5.1
Slide-mounting instructions
Installation procedures are illustrated in Figure 2.5.2.
(1)
Extend the slide guide and release from the slide rail.
(2)
Install the slide guide in the 19-inch rack or cabinet.
(3)
With both the slide guides installed and extended, lift the drive with
slide rails already attached onto the extended guides.
Be sure the rails
are correctly seated and latched in the guides.
2 - 4
Note:
The drive weighs approximately 143 lbs (65 kg), and requires at
least two people to install.
Left Slide Guide
Rack Mount Striker (4)
Slide lock
(Press to Release)
Slide rail
Figure 2.5.2
Rack mount installation
B03P-4825-0002A ••• 02
Advertisement
Table of Contents
Troubleshooting
