Operator Panel Replacement; Display Panel Replacement - Fujitsu M2361A Customer Engineering Manual

6.6.5 Operator panel replacement
Refer to Figure 6.6.7.
(1)
Removal
CD
Remove the
4
screws
"A"
holding the front panel, and then remove it.
CD
Remove the connector (CN83) that goes out from the operator panel.
Q)
Remove the
4
screws
"B"
holding the operator panel, and then remove
it.
(2) Installation
Follow, in reverse order, the procedures for removal.
6.6.6 Display panel replacement
Refer to Figure 6.6.7.
(1) Removal
CD
Remove the 4 screws "A" holding the front panel and then remove it.
Ci)
Remove the connectors (CN31-33) that go out from the display panel.
Q)
Remove the 6 screws
"c"
holding the display panel and then remove the
PCB.
(2) Installation
Follow, in reverse order, the procedures for removal.
6 - 12
B03P-482S-0002A ••• Ol