Air Filter Replacement; Line Blower Replacement - Fujitsu M2361A Customer Engineering Manual

6.6.9 Air filter replacement
Refer to Figure 6.6.10.
(1) Removal
CD
Remove the 4 screws "A" holding the front panel and then remove it.
@
Remove the 2 screws "B" holding the air filter and then remove it.
(2) Installation
Follow in reverse order, the procedures for removal.
6.6.10 Line blower replacement
Refer to Figure 6.6.10.
(1) Removal
CD
Remove the power amplifier PCB. (Refer to item (1) of subsection
6.6.8.)
(6)
Remove the 4 screws "C" holding the blower bracket.
(J)
Remove the 4 screws "D" holding the upper side of the line blower.
Caution: Take care not to drop the screws.
QD
Remove the air filter. (Refer to item (1) of subsection 6.6.9.)
CD
Remove the connector (CN7l) that goes out from the fan sensor, and
remove the blower assembly.
QV
Remove the connector (CN9l) that goes out from the line blower.
CD
Pull and remove the fan sensor.
(2) Installation
Follow in reverse order, the procedure for removal.
B03P-482S-0002A ••• 01
6 - 17