Table of Contents
Advertisement
5.2
Error State
The drive and the controller will issue the follwoing statuses.
Table 5.2.1
Error status
NOT READY
!
Not Ready status indicates drive is not ready.
FAULT
Fault status indicates a fault conditions has occurred in
the drive.
--
SEEK ERROR
Seek Error status indicates a seek error has occurred in
seek operation.
READ ERROR
Read Error status indicates a data error has occurred in
read oeration.
AM MISSING
AM Missing status indicates that AM (Address Mark) has not
found in read operation.
Maintenance Personnel can see the drive status and error state on the display
panel and the operator panel.
Refer to Sections 3.3 and 3.4 for detailed drive
status and error state, and how to know the error state by drive state
indicators (colored LEDs) , state indicators (7-segment LEDs) and state switch
(Toggle Switch) mounted on the display panel.
The trouble shooting guide is provided with the error state which is defined by
indicators on the display panel and the operator panel.
The error state is shown in Table 5.2.1.
5 - 2
B03P-4825-0002A ... 02
Advertisement
Table of Contents
Troubleshooting
