Troubleshooting And Tips; Help If Problems Occur; Troubleshooting; Power Indicator Remains Off After You Have Switched On Your Device - Fujitsu ESPRIMO P556 Operating Manual

Table of Contents

Advertisement

Troubleshooting and tips

Troubleshooting and tips
Refer to the safety notes in the "Safety/regulations" manual and in the
started", Page 11
If a fault occurs, try to correct it as described in the following documentation:
in this chapter
in the documentation for the connected devices
in the help systems of the software used
in the documentation for your operating system

Help if problems occur

Should you encounter a problem with your computer that you cannot resolve yourself:
► Note the ID number of your device. The ID number is found on the type rating
plate on the back, the underside or the top of the casing.
► For further clarification of the problem, contact the Service Desk for your country (see the
Service Desk list or visit the Internet at "http://support.ts.fujitsu.com/contact/servicedesk"). When
you do this, please have ready the identity number and serial number of your system.

Troubleshooting

Power indicator remains off after you have switched
on your device
Cause
The mains voltage supply is faulty.
Internal power supply overloaded.
24
chapter when connecting or disconnecting cables.
Remedy
► Check that the power cable is correctly
plugged into the device and into a grounded
mains outlet.
► Check that the main switch at the rear of the
device is set to the "I" position.
► Switch the device on.
► Pull the power plug of the device out of the
mains outlet.
► Wait for about 3 minutes.
► Plug the power plug into a properly grounded
mains outlet again.
► Switch the device on.
"Getting
Fujitsu

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esprimo ph556

Table of Contents