Power Cord Selection - Fujitsu SCENIC8651 Manual

Important notes

Power cord selection

For the United States and Canada
Use a UL listed and CSA labeled cord set consisting of a three conductor cord with a maximum
length of 15 feet.
For units which stand on a desk or table, type SVT or SJT cord sets shall be used.
For units which stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit. Please consult Table A
for the selection criteria for power cords used in the United States and Canada.
Table A:
Cord Type
SJT
SVT
For units set at 115 V:
use a parallel blade, grounding type attachment
plug rated 15 A, 125 V.
6
Size of Conductors
in Cord
18 AWG
16 AWG
14 AWG
18 AWG
17 AWG
The power cord for this unit has been packed
separately and has been selected according to
the country of destination. It must be used to
prevent electric shock. Use the following
guidelines if it is necessary to replace the
original cord set.
The female receptacle of the cord set must meet
CEE-22 requirements (see Figure).
Maximum Current
For units set at 230 V (domestic use):
use a tandem blade, grounding type attachment
plug rated 15 A, 250 V.
Manufacturer's notes
Rating of Unit
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
A26361-K516-Z100-3-7619