Dräger Savina 300 Technical Documentation Manual page 36

Maintenance instructions
Disassembling/assembling the device
36
3. Holding the lever (Fig.
(Fig. 26/1) towards A and take it out of the rear panel.
Fig. 26 View of right rear of device; cable retainer
4. Remove the Savina 300 from the trolley, see section headed „Remov-
ing/fitting the Savina 300 from/into the trolley".
5. Remove the screws (9x)
Fig. 27 View of device rear; screws
6. Remove the rear panel.
Removal of the rear panel is now complete.
Savina 300
26/2) pushed back slightly, push the cable retainer
(Fig. 27/1).