Dräger Savina 300 Technical Documentation Manual page 111

Test instructions / Service Card IPM
Savina 300
NOTE
– Prior to using these test instructions, check that they are the latest revi-
– All results and inputs must be documented in the „Test Report" or „Result
NOTE
Do not use these test instructions for testing after a repair procedure.
This test procedure applies to devices with software version 03.50 and
higher.
Conversion table: 1 bar = 14.504 PSI / 1 mbar = 1.01973 cm H2O.
sion (compare revision with current service documentation).
Sheet", as applicable.
1 / 50