Setting The Fence Stops - Craftex CX Series User Manual

4. Using a screwdriver, adjust the scale
pointer exactly to "0" (zero) (Fig.NN)
Figure NN

Setting the Fence Stops

Fence stops are adjustable nuts and bolts to
simplify the task of adjusting the fence to
45 deg. inward, 90 deg., and 45 deg.
outward (135 deg.)
Setting the 45 deg. Inward Fence Stop
1. With a 45 deg. square, adjust the
fence to the 45 deg. inward position.
Figure OO
2. Loosen the jam nut (Fig.PP)
Figure PP
3. Adjust the 45 deg. inward fence stop
nut until it makes contact with the
back of the fence bracket, then re-
tighten the jam nut from Step 2 and
recheck.
Setting the 90 deg. Fence Stop
1. Flip the 90 deg. swing stop into the
position as in (Fig. QQ)
Figure QQ
2. With a 90 deg. square, adjust the
fence to the 90 deg. position (Fig.
RR) using the fence stop bolt and
jam nut.
Figure RR
3. Loosen the jam nut on the 90 deg.
fence stop bolt (Fig. QQ)
4. Adjust the 90 deg. fence stop bolt
until it contacts the 90 deg. swing
stop, then re-tighten the jam nut
from Step 3 and recheck.
26