Plug And Grounding Requirements - Craftex CX Series User Manual

3. If you choose to connect to a shared
circuit where
machine may be running at a time
please consult with a qualified
electrician to insure the circuit is
properly sized for safe operation.
PLUG AND GROUNDING
REQUIREMENTS
This machine must be grounded so that
in the event of certain malfunctions it will
reduce the chances of electrical shock
by providing a path of least resistance
for the electric current to travel through.
For this reason the CX06HC comes with
a cord with an equipment grounding
wire that leads in to the grounding prong
on the plug.
NOTE:
The three prong plug is only to be
plugged in to the matching receptacle
that is properly installed according to the
local electrical codes and standards.
Under no circumstances should you
modify the plug to make it fit in a
receptacle that it is not meant for this
configuration. ( see figure 1)
more than one
Figure 1
If there is an improper connection of a
machine grounding wire it may result in
a heightened risk of electric shock. If
repair or replacement of the power cord
is necessary in the future please consult
a licensed electrician
If ever you notice damage or wear to
either the cord or plug disconnect it
immediately from the power supply and
have it replaced by a licensed electrician
or service tech before any further use of
the machine
.
USE WITH EXTENSION CORDS
If you absolutely must require the use of
an extension cord with your machine do
so, on a temporary short term basis
only.
7
.
NOTE: