Table of Contents
Advertisement
About Fibre Transport paths for NetBackup
appliances
Function
From
Backups
NetBackup SAN client.
Restores
NetBackup 52xx or 53xx appliance.
The appliance is the restore server and the storage
host.
Backups
NetBackup SAN client.
5340 Appliance rear panel riser assembly locations
Figure 1-4
riser assembly 3
Table 1-11
shows the backup, restore, and duplication paths for NetBackup Fibre
Transport (FT) for NetBackup appliances. It also shows the FT settings from the
NetBackup Appliance Web Console that enable a functionality.
FT requires the following appliance software versions:
NetBackup 5330 appliance versions 2.6.1 and later are compatible with
■
NetBackup 50xx deduplication appliance versions 1.4.2 and later.
NetBackup 52xx and 53xx appliances must use software version 2.7.3 and later
■
on both the source host and the target host to duplicate data.
Appliance Fibre Transport targets
Table 1-11
Introducing Fibre Channel support on NetBackup Appliance
About Fibre Transport paths for NetBackup appliances
PCIe
PCIe
riser assembly 2
To
NetBackup 52xx or 53xx appliance.
The appliance is the backup server and the storage
host.
NetBackup SAN client.
NetBackup 5020 deduplication appliance.
The 5020 deduplication appliance is the storage
host.
The 52xx or 53xx appliance is the backup server
and forwards the backups to the 5020 appliance.
PCIe
riser assembly 1
3
2
1
27
6
5
4
Advertisement
Table of Contents
