Table of Contents
Advertisement
About Fibre Transport for optimized duplication and Auto Image Replication between appliances
About the SAN Client license key
About Fibre Transport for optimized duplication
and Auto Image Replication between appliances
For more information about SAN Client and Fibre Transport, see the NetBackup
SAN Client and Fibre Transport Guide from the NetBackup Documentation set at
the following link:
http://www.veritas.com/docs/DOC5332
See
"About the SAN Client license key"
See
"About zoning the SAN for NetBackup appliances"
See
"About Fibre Transport paths for NetBackup appliances"
On the NetBackup master server, enter the license that activates the SAN Client
feature.
If the license expires or is unavailable (such as in a disaster recovery situation),
backups and restores occur over the LAN.
For a NetBackup 52xx or 53xx appliance, Fibre Transport (FT) provides high-speed
traffic to another NetBackup appliance that supports FT. The traffic can be for
optimized duplication or Auto Image Replication.
For optimized duplication and Auto Image Replication over FT, the source appliance
must be a NetBackup 52xx or 53xx appliance. The target appliance can be the
following:
NetBackup 5020 or 5030 appliance
■
NetBackup 52xx or 53xx appliance
■
Note: On the NetBackup 52xx or 53xx appliances, the support for optimized
duplication or Auto Image Replication over FT depends on the HBA configuration
of each appliance.
See
"About Fibre Channel feature support with appliance HBA configurations"
on page 14.
To use FT for optimized duplication and Auto Image Replication, you must complete
different FT settings on the source and the target appliances.
On the source appliance, you must enable FT for optimized duplication and
■
replication to other appliances.
Introducing Fibre Channel support on NetBackup Appliance
on page 11.
on page 51.
on page 27.
11
Advertisement
Table of Contents
