Page 2
LLC or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners. This product may contain third party software for which Veritas is required to provide attribution to the third party (“Third Party Programs”). Some of the Third Party Programs are available under open source or free software licenses.
Page 3
Japan CustomerCare_Japan@veritas.com Documentation Make sure that you have the current version of the documentation. Each document displays the date of the last update on page 2. The latest documentation is available on the Veritas website: https://www.veritas.com/content/support/en_US/Document page.html Documentation feedback Your feedback is important to us. Suggest improvements or report errors or omissions to the documentation.
....35 About NetBackup 5340 Appliance storage shelves ......35 Available appliance storage options ........... 37 About the Veritas 5U84 Storage Shelf disk drive drawers ....39 5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf control panel ............50 About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components ............
Chapter About the NetBackup 5340 Appliance This chapter includes the following topics: About the NetBackup 5340 Appliance ■ Features and components of the appliance ■ Locating the appliance serial number ■ About the appliance compute node disk drive configurations ■...
About the NetBackup 5340 Appliance About the NetBackup 5340 Appliance The NetBackup 5340 Appliance is a hardware and software storage system that can scale up to a total of 1920TB of usable backup capacity. It consists of one 2U NetBackup 5340 Appliance compute node and one required externally attached 5U84 Primary Storage Shelf for data storage purposes.
Features and components of the appliance High Availability Reference Guide for information about how to prepare for appliance HA deployment. Features and components of the appliance This section describes the features and components of the NetBackup 5340 Appliance. NetBackup 5340 Appliance system specifications Table 1-1...
Page 9
PCIe riser assembly RAID levels RAID10 (striping and mirroring) and RAID6 (block level striping with double distributed parity) are used as follows: RAID10: NetBackup 5340 Appliance compute node system ■ disks RAID6: 5U84 Primary Storage Shelf and 5U84 Expansion ■...
Page 10
■ the rear extremity of the chassis) Note: The lengths of the Veritas 5U84 Storage Shelves are longer that what a standard IEC-compliant rack normally supports. Due to the additional length, the rack-based PDU hardware may need to be installed on the outside of the rack to accommodate the storage shelves.
Page 11
About the NetBackup 5340 Appliance Features and components of the appliance NetBackup 5340 Appliance system specifications (continued) Table 1-1 Technical NetBackup 5340 Appliance system Specification Typical power 4,300 watts consumption with a maximum of four external storage shelves Maximum power...
About the NetBackup 5340 Appliance Locating the appliance serial number NetBackup 5340 Appliance system specifications (continued) Table 1-1 Technical NetBackup 5340 Appliance system Specification Power Factor > 90% System cooling Typical: requirement (heat 14,408 BTU/hour ■ dissipation) Maximum: (Appliance with 19,267 BTU/hour ■...
About the appliance compute node disk drive configurations The NetBackup 5340 Appliance compute node contains five 2 TB SAS hard disk drives, which can be accessed from the compute node's front panel. An embedded RAID controller on the compute node's mainboard is used to configure four of the five disk drives into two RAID1 mirrored volumes.
About the NetBackup 5340 Appliance About the appliance compute node disk drive configurations NetBackup 5340 Appliance compute node front panel disk drive Table 1-2 configurations (continued) Slot RAID Disk drive Disk drive role level size (TB) 2 TB Hot spare...
About the compute node front panel USB port The NetBackup 5340 Appliance compute node front panel includes a USB 2.0-compliant port that supports a data transfer rate of up to 480 Mb/second. About the appliance control panel The 5340 Appliance compute node includes a control panel on the right side of the front panel.
Page 16
(NMI), and then triggers the non-maskable interrupt. All server data can be lost. Veritas recommends that you do not enable NMI by pressing the NMI button. System Cold Reset Button When depressed, the System Cold Reset button (recessed, tool required for re-boots and re-initializes the appliance.
About the NetBackup 5340 Appliance About the appliance control panel 5340 Appliance control panel system LED descriptions Table 1-4 (continued) Label Description System Status LED The System Status LED is bi-color indicator that uses the colors green and amber to display the current health of the appliance.
Page 18
About the NetBackup 5340 Appliance About the appliance control panel System Status LED states Table 1-5 Color State Criticality Description Off - The Not ready System is power off (AC and/or DC) ■ color system is not System is in EuP Lot6 Off Mode ■...
Page 19
About the NetBackup 5340 Appliance About the appliance control panel System Status LED states (continued) Table 1-5 Color State Criticality Description Green ~1 Hz blink Degraded System degraded (continued): (continued) BMC booting Linux. (Indicated by Chassis ID ■ solid ON). System in degraded state (no manageability).
Unable to synchronize QPI link frequency ■ About the Power button LED states The Power button is located on the NetBackup 5340 Appliance control panel. It is used to turn the appliance on or off. Power button control panel location...
About the NetBackup 5340 Appliance About the appliance compute node rear panel Power button LED states Table 1-6 State Power Mode Description Power - off Non-ACPI The system power is off, and the BIOS has not initialized the chipset. Power - on...
Page 22
Table 1-7 (continued) Number Function Serial port - Serial connection for Veritas Technical Support use only Three stacked USB 3.0 Type A serial ports for general use IPMI port - An external RJ45 port used for appliance remote management purposes...
Page 23
(continued) Number Function * The NetBackup 5340 Appliance add-in cards are available in multiple configurations. Several configurations include at least one Fibre Channel host bus adapter card for VMware, optimized deduplication over Fibre Channel, or tape library connectivity. In some configurations the Fibre Channel host bus adapter cards are installed into some of the PCIe slots.
Standard available NetBackup 5340 Appliance PCIe-based I/O configurations The rear panel of the NetBackup 5340 Appliance contains three PCIe riser card assemblies. PCIe riser card assemblies 1 and 2 each support three standard PCIe cards, while PCIe riser card assembly 3 supports two low profile PCIe cards. The slots are labeled 1 to 8.
Page 25
For example, use two model 5340 appliances with configuration D. You cannot use one model 5340 appliance with configuration D and one model 5330 appliance with configuration D. This requirement applies to all of the I/O configurations for each model. Standard available NetBackup 5340 Appliance PCIe-based I/O Table 1-8 configurations Slot...
* The 16Gb Fibre Channel HBA ports in slots 1 and 4 are used to connect the NetBackup 5340 Appliance compute node to the Veritas 5U84 Primary Storage Shelf. As a result, slots 1 and 4 do not support standard network I/O operations.
Page 27
About the NetBackup 5340 Appliance About the appliance compute node rear panel Total number of NetBackup 5340 Appliance On-board and Table 1-9 PCIe-based I/O ports for each available I/O configuration (continued) 16Gb Fibre 10Gb 8Gb Fibre 1Gb Ethernet Configuration Channel...
Page 28
About the NetBackup 5340 Appliance About the appliance compute node rear panel QLE2692 dual-port 16Gb Fibre Channel host bus adapter Table 1-10 specifications Item Description Bracket Full Height height Form factor Low-profile PCIe card (6.6 inches × 2.731 inches) Power 9.3 W...
Page 29
About the NetBackup 5340 Appliance About the appliance compute node rear panel QLE2692 dual-port 16Gb Fibre Channel host bus adapter Table 1-10 specifications (continued) Item Description System PCIe v3.0 interface type Certifications UL, CSA, TUV, CB, FCC, VCCI Maximum Rate...
Page 30
About the NetBackup 5340 Appliance About the appliance compute node rear panel QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules The QLE8442 is a dual-port 10GbE network interface card. It supports simultaneous LAN (TCP/IP) and SAN (Fibre Channel over Ethernet [FCoE] and iSCSI) traffic at 10Gbps Ethernet (GbE) line rate speeds.
Page 31
Air flow 100 LFM @ 55 C To purchase a QLE8442 dual-port 10Gb Ethernet card with SFP+ modules for your appliance, contact your Veritas sales representative, or your Veritas Partner representative. QLE8442 dual-port 10Gb Ethernet card with SFP+ modules SKU Number...
Page 32
About the NetBackup 5340 Appliance About the appliance compute node rear panel QLE2562 dual-port 8Gb Fibre Channel host bus adapter port Table 1-13 specifications Item Description Bracket height Full Height Power 6.2 watts (typical) consumption (watts) Operating 0°C to 55°C (32°F to 131°F)
16Gbps link / input-output (I/O) activity To purchase a QLE2562 dual-port 8Gb Fibre Channel host bus adapter for your appliance, contact your Veritas sales representative, or your Veritas Partner representative. QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules...
Page 34
For more information, see the Veritas NetBackup™ 53xx Appliance Initial Configuration Guide - Release 3.1. Note: Veritas does not support forming a NIC bond using eth0/NIC1 with other eth/NIC ports. eth1/NIC2 A 1-GbE port for general use...
About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear ■ components About NetBackup 5340 Appliance storage shelves Veritas offers two external storage shelf models for the NetBackup 5340 Appliance. These include the: Veritas 5U84 Primary Storage Shelf (required) ■...
Page 36
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves Both of the 5U84 Storage Shelf chassis include a set of common internal core components, along with a set of plug-in modules. The core components include: Two sliding disk drawers that contain Disk Drive In Carrier (DDIC) modules ■...
Available appliance storage options The NetBackup 5340 Appliance compute node does not contain internal disk space on which to store data. Instead, the NetBackup 5340 Appliance uses the Veritas 5U84 Primary Storage Shelf as the main data storage device. The 5U84 Primary Storage Shelf connects to the NetBackup 5340 Appliance compute node and uses RAID 6 disk array technology to protect the stored data.
Page 38
600TB 1200TB 720TB 1440TB 840TB 1680TB 960TB 1920TB NetBackup 5340 Appliance software version 3.1 supports up to 916TBs of usable MSDP storage capacity. Available 5U84 Storage Shelf configurations Figure 2-1 LEGEND: Total Capacity With 4TB shelves With 8TB shelves Storage Shelf Population Half populated 5U84 Storage Shelf –...
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves About the Veritas 5U84 Storage Shelf disk drive drawers This section discusses the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf disk drive drawers and the components that comprise the drawers.
Page 40
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves In the top drive drawer, the drive slots are numbered from left to right, beginning with the first compartment that is closest to the front panel. The drive slots in this compartment are numbered 0 to 13.
Page 41
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves Disk drive slot numbering Figure 2-3 Bottom drawer Top drawer (drawer 2) (drawer 1) Disk Drive In Carrier (DDIC) modules All storage shelf hard disk drives are housed in DDIC modules. Each disk drive drawer accepts a Disk Drive In Carrier (DDIC) module for each disk drive slot in the drawer.
Page 42
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves Disk Drive In Carrier (DDIC) module Figure 2-4...
Page 43
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves Disk Drive In Carrier (DDIC) module components and locations Figure 2-5 5U84 Storage Shelf DDIC component locations Table 2-2 Number Component Grey touch points Note: Touch points are used to facilitate the removal of the DDIC module from the storage shelf drawer.
Page 44
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves Disk Drive Drawer printed circuit board (PCB) assemblies Each disk drive drawer in a 5U84 storage shelf uses a printed circuit board (PCB) assembly to provide the electrical connectivity to the drawer's disk drives.
Page 45
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves Each PCB assembly contains two Drawer Sideplane cards. One Sideplane card mounts on the right side of the disk drawer, while the other card mounts on the left side of the drawer.
Page 46
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves Drawer Baseplane example Figure 2-8 Drawer Sideplane Status panels Drawer Sideplane Status panels are located on the front of the 5U84 storage shelves. These panels provide status and the activity information about the Sideplane card.
Page 47
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves 5U84 Primary Storage Shelf / 5U84 Expansion Storage Shelf Figure 2-10 Drawer Sideplane Status panel Drawer Sideplane Status panel descriptions Table 2-4 Number Item Sideplane card OK / Power good...
Page 48
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves Drawer Sideplane LED statuses (continued) Table 2-5 Status Power Drawer Fault Cable Fault Logical Fault Activity Bar Graph (Green) (Amber) (Amber) (Amber) (Green) Drive failure has occurred causing...
Page 49
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves Drawer Sideplane hot-swap LED location Figure 2-11 indicators Surrounding metal frame The following table describes the Drawer hot-swap Sideplane LED indicator statuses. Drawer Sideplane Hot-swap LED indicator statuses...
About the Veritas 5U84 Storage Shelves About NetBackup 5340 Appliance storage shelves 5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf control panel The control panel is installed on the left side of both the 5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf. It is functionally the same for both systems.
About the Veritas 5U84 Storage Shelves About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components Control panel functions and descriptions Table 2-7 Number Function Description Unit Identification The Unit Identification Display is a dual digit display that Display provides information about the storage shelf.
Page 52
About the Veritas 5U84 Storage Shelves About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components Fan modules ■ Power Supply Units (PSUs) ■ 5U84 Primary Storage Shelf rear components Figure 2-14 5U84 Primary Storage Shelf rear component locations...
Page 53
The RAID controllers also provide RAID data protection technology for the optional 5U84 Expansion Storage Shelves that you connect to the 5U84 Primary Storage Shelf. Fiber optic cables connect the NetBackup 5340 Appliance compute node to the 5U84 Primary Storage Shelf through the storage shelf's RAID controllers.
58. Veritas 5U84 Primary Storage Shelf RAID Controllers The Veritas 5U84 Primary Storage Shelf uses dual, hot swappable RAID Controllers. These controllers create and manage the 5U84 Primary Storage Shelf disk drive RAID arrays that contain backed up data. They also create and manage the RAID disk drive arrays on 5U84 Expansion Storage Shelves when those are attached to the 5U84 Primary Storage Shelf.
Page 55
5U84 Expansion Storage Shelf. Veritas 5U84 Primary Storage Shelf RAID Controllers Figure 2-16 The following figure and table provides component details for the Veritas 5U84 Primary Storage Shelf RAID Controller modules. Veritas 5U84 Primary Storage Shelf RAID Controller components...
Page 56
16Gb Fibre Channel ports Activity LED Activity LEDs The following figure and table provides RAID Controller indicator LED details for the Veritas 5U84 Primary Storage Shelf RAID Controller modules. Veritas 5U84 Primary Storage Shelf RAID Controller indicator Figure 2-18 LED details...
Page 57
About the Veritas 5U84 Storage Shelves About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components RAID Controller indicator LED descriptions and definitions Table 2-11 (continued) Description Definition Fault Off - The controller is operating normally. Amber - A controller fault has been detected or a service action is required.
Cache Status LED support power on behavior and operational (cache status) behavior. When the port is down, both LEDs are off. Veritas 5U84 Expansion Storage Shelf Expansion I/O modules Veritas 5U84 Expansion Storage Shelf Expansion I/O modules provide SAS3 data throughput and communications between one or more 5U84 Expansion Storage Shelves.
Page 59
About the Veritas 5U84 Storage Shelves About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components Veritas 5U84 Expansion Storage Shelf Expansion I/O module Figure 2-20 Expansion I/O module components and locations Table 2-12 Number Component Expansion I/O module...
Page 60
About the Veritas 5U84 Storage Shelves About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components Expansion I/O module icon and Status LED conditions Table 2-13 Condition Activety LED (green) Fault LED (amber) The Expansion I/O module has encountered a fault condition.
Veritas 5U84 Storage Shelf cooling modules The Veritas 5U84 Storage Shelves include five cooling modules. The cooling modules provide cooling to the entire unit, which is suitable to maintain the internal component temperatures below each components maximum temperature limits.
PSUs are hot-swappable. You can replace a faulty PSU while the storage shelf is running. However, you must complete the PSU replacement procedure within two minutes after you remove the faulty PSU. Veritas 5U84 Storage Shelf chassis are keyed to prevent PSUs from being inserted upside down.
Page 63
About the Veritas 5U84 Storage Shelves About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components 5U84 Storage Shelf Power Supply Unit Figure 2-24 The rear panel of the PSU includes a power switch, three status LEDs, and an AC socket for the power cord.
■ Power cables Each of the AC power modules in both the NetBackup 5340 Appliance and the required Veritas 5U84 Primary Storage Shelf accept one AC power cable. The optional 5U84 Expansion Storage Shelf also uses one AC power cord in each of its AC power modules.
Page 65
Cable rating: 15A 250V Note: If your power distribution unit is not compatible with the IEC-60320-C14 plug, Veritas recommends that you purchase your power cable locally. Make sure that the power cable meets or exceeds the indicated power rating. “NetBackup 5340 compute node technical specifications”...
Cable rating: 20A 250V Note: If your power distribution unit is not compatible with the IEC-60320-C20 plug, Veritas recommends that you purchase your power cable locally. Make sure that the power cable meets or exceeds the indicated power rating. “ Veritas 5U84 Storage Shelf technical specifications”...
NetBackup 5340 Appliance and 5U84 Storage Shelf cables Multi-mode fiber optic cable connects to the network switch or an external gateway. Both ends of the cable are RJ45 connectors. Network cable Figure 3-3 “Power cables” on page 64. “SAS3 cable”...
66. “SAS3 cable” on page 68. “Twinaxial copper cables” on page 69. SAS3 cable SAS3 data cables are used to connect the 5U84 Primary Storage Shelf to an optional Veritas 5U84 Expansion Storage Shelf. SAS3 cables also connect multiple 5U84...
NetBackup 5340 Appliance and 5U84 Storage Shelf cables Twinaxial copper cables Expansion Storage Shelves to each other. SAS3 cables have SAS3 connectors on both ends. Two SAS3 cables ship with each Veritas 5U84 Expansion Storage Shelf. SAS3 cable Figure 3-5 “Power cables”...
Page 70
NetBackup 5340 Appliance and 5U84 Storage Shelf cables Twinaxial copper cables “Power cables” on page 64. “Network cable” on page 66. “Multi-mode fiber optic cable” on page 67. “SAS3 cable” on page 68.
Specification Rack information 19" EIA standard The rack rails that are provided for the NetBackup 5340 Appliance compute node are extensible to 36” (914mm). This distance is the maximum depth that is allowed between rack posts. If the distance between rack posts is longer than 36” (914mm) the rails and the appliance cannot be properly installed.
Page 73
MSDP storage capacity: up to 916TB capacity (TB) “Available appliance storage options” on page 37. Maximum number of storage shelves One Veritas 5U84 Primary Storage Shelf; three Veritas 5U84 Expansion Storage Shelves I/O ports 16Gb Fibre Channel ports “Standard available (PCIe-based)
Page 74
■ to the rear extremity of the chassis) Note: The lengths of the Veritas 5U84 Storage Shelves are longer that what a standard IEC-compliant rack normally supports. Due to the additional length, the rack-based PDU hardware may need to be installed on the outside of the rack to accommodate the storage shelves.
“Protocol standards” on page 78. “Regulatory, compliance, and certification information” on page 79. Veritas 5U84 Storage Shelf technical specifications The following table provides technical specifications for both the Veritas 5U84 Primary Storage Shelf and the Veritas 5U84 Expansion Storage Shelf.
Page 76
Technical specifications, Environmental/Protocol standards, and Compliance standards Veritas 5U84 Storage Shelf technical specifications Veritas 5U84 Primary Storage Shelf / 5U84 Expansion Storage Table A-2 Shelf technical specifications Technical specification Description Rack information The rack installation height is the space occupied by a storage shelf in a rack cabinet.
Page 77
Technical specifications, Environmental/Protocol standards, and Compliance standards Veritas 5U84 Storage Shelf technical specifications Veritas 5U84 Primary Storage Shelf / 5U84 Expansion Storage Table A-2 Shelf technical specifications (continued) Technical specification Description Maximum output power 2214W maximum continuous output power at high line voltage You can connect up to four storage shelves to the 5340 Appliance compute node.
“ Veritas 5U84 Storage Shelf technical specifications” on page 75. “Protocol standards” on page 78. “Regulatory, compliance, and certification information” on page 79. Protocol standards The following table provides standards with which the NetBackup 5340 Appliance and the Veritas 5U84 Primary/Expansion Storage Shelf comply.
Technical specifications, Environmental/Protocol standards, and Compliance standards Regulatory, compliance, and certification information regulatory approvals of the product. The result is noncompliance with product regulations in the region(s) in which the product is sold. Before computer integration make sure that the appliance, power supply, and other modules have passed EMC testing.
Technical specifications, Environmental/Protocol standards, and Compliance standards Regulatory, compliance, and certification information IRAM Certification (Argentina) ■ GB4943- CNCA Certification (China) ■ Product EMC Compliance - Class A Compliance The following is a list of EMC compliance norms for different countries: FCC /ICES-003 - Emissions (USA/Canada) Verification ■...
Technical specifications, Environmental/Protocol standards, and Compliance standards Regulatory, compliance, and certification information California Code of Regulations, Title 22, Division 4.5, Chapter 33: Best ■ Management Practices for Perchlorate Materials China - Restriction of Hazardous Substances (China RoHS) ■ WEEE Directive (Europe) ■...
Page 83
Technical specifications, Environmental/Protocol standards, and Compliance standards Regulatory, compliance, and certification information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 84
Technical specifications, Environmental/Protocol standards, and Compliance standards Regulatory, compliance, and certification information CE Declaration of Conformity (Europe) This product has been tested in accordance to, and complies with the Low Voltage Directive (73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked with the CE Mark to illustrate its compliance.
Need help?
Do you have a question about the NetBackup 5340 and is the answer not in the manual?
Questions and answers