VERITAS NetBackup Series Manual page 25

I/O Slot
configuration
1 *
option
†
A QLogic
QLE2692
16Gb FC
HBA
††
B QLogic
QLE2692
16Gb FC
HBA
5340 Appliance rear panel riser assembly locations and PCIe
Figure 1-3
slot number assignments
Assembly 3
The 5340 Appliance supports multiple PCIe-based I/O configurations. The following
table shows the standard I/O configurations that are available with a 5340 Appliance.
Note: A 5340 Appliance high availability (HA) configuration must use two identical
5340 compute nodes with regard to model number and hardware configuration.
For example, you can use two 5340 compute nodes with configuration D. However,
you cannot use one 5340 Appliance compute node with configuration D and one
5340 Appliance compute node with configuration B.
This requirement applies to all of the I/O configurations for each model.
Available 5340 Appliance PCIe-based I/O configurations
Table 1-10
Slot Slot
2 3
QLogic QLogic
QLE8442 QLE8442
10GbE 10GbE NIC
3 1, 3 1, 3
NIC
(iSCSI (iSCSI
capable) capable)
QLogic QLogic
QLE8442 QLE8442
10GbE 10GbE NIC
3 1, 3 1, 3
NIC
(iSCSI (iSCSI
capable) capable)
Introducing Fibre Channel support on NetBackup Appliance
Supported data transfer methods for NetBackup appliances
Riser
8
3
7
2
1
Slot Slot
4 * 5
QLogic QLogic
QLE2692 QLE8442
16Gb FC 10GbE
3 1, 3
HBA NIC
(iSCSI
capable)
QLogic QLogic
QLE2692 QLE8442
16Gb FC 10GbE
3 1, 3
HBA NIC
(iSCSI
capable)
Riser
Assembly 2 Assembly 1
Slot Slot
6 7
QLogic Reserved
QLE8442
10GbE NIC
1, 3
(iSCSI
capable)
QLogic Reserved
QLE2562
8Gb FC
3
HBA
25
Riser
6
5
4
Slot
8
QLogic
QLE8442
10GbE NIC
1, 3
(iSCSI
capable)
QLogic
QLE8442
10GbE NIC
1, 3
(iSCSI
capable)