About Fibre Channel Feature Support With Appliance Hba Configurations - VERITAS NetBackup Series Manual

About Fibre Channel feature support with appliance HBA
configurations
Unsupported data transfer methods for NetBackup
Table 1-2
appliances (continued)
Method Source
FC SAN Client
TCP/IP 5020/5030
See "About Fibre Channel supported features on NetBackup Appliance"
See "About the NetBackup 5230 rear panel configurations"
See "NetBackup 5330 Appliance compute node PCIe slot I/O configuration options"
on page 23.
See "NetBackup 5240 Appliance I/O configuration options"
Fibre Channel (FC) feature support depends on the particular HBA configuration
of each appliance. This section describes what FC features are supported with
different appliance HBA configurations.
To check whether a particular FC feature is supported on your appliance, refer to
the following tables.
See Table 1-3 on page 15.
■
See Table 1-4 on page 15.
■
See Table 1-5 on page 16.
■
See Table 1-6 on page 17.
■
If you do not know what HBA configuration you have on the appliance model, refer
to the following topics for the appliance rear panel configuration:
See "About the NetBackup 5230 rear panel configurations"
See "NetBackup 5240 Appliance I/O configuration options"
See "NetBackup 5330 Appliance compute node PCIe slot I/O configuration options"
on page 23.
You can also refer to the NetBackup Appliance Product Description Guide for your
appliance model at the
Introducing Fibre Channel support on NetBackup Appliance
Supported data transfer methods for NetBackup appliances
Target Operation
52xx/53xx Client-side deduplication
52xx/53xx Auto Image Replication
NetBackup Appliance Documentation
on page 6.
on page 18.
on page 20.
on page 18.
on page 20.
page.
14