Chapter 2 Introduction; Introduction; Preparing For Installation - Raven SmarTrax Installation Manual

I NTRODUCTION
CHAPTER
C H A P T E R 2
2

INTRODUCTION

Congratulations on your purchase of the Raven SmarTrax system! This system is designed to provide cutting-edge,
hands-free steering of the machine via Global Positioning System (GPS) coordinates.
This manual applies to the following machines:
MAKE: Case IH
MODEL: MX 180, 200, 220, 240, and 270
YEAR: 1999-2002
FIGURE 1. Case IH MX270

PREPARING FOR INSTALLATION

Before installing SmarTrax, park the machine where the ground is level, clean, and dry. Leave the machine turned
off for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
RECOMMENDATIONS
Raven Industries recommends the following best practices before installing or operating the SmarTrax system for
the first time, at the start of the season, or when moving the SmarTrax system to another machine:
P/N 016-5032-033 Rev. A 5