C
5
HAPTER
5. Identify the node mounting location in the left rear of the cab.
6. Remove the bolt from the floor of the cab.
FIGURE 3. Outside Panel to be Removed
Exterior Panel
Removed
7. Remove the left rear panel outside the cab.
FIGURE 4. Node Installed
8. Align the node mounting bracket with the two holes in the cab floor and secure it using the supplied 1/4"-20 x
1.25" bolts (P/N 311-0050-106), 1/4" washers (P/N 313-2301-810), and 1/4"-20 zinc hex nuts (P/N 312-1001-031).
NOTE:
If a second bolt hole does not exist, use the ECU mounting bracket as a template and drill a second
hole in the floor.
36
Case IH MX 180-270, MFWD Axles - Model Year 1999-2002 SmarTrax™ Installation Manual