C
4
HAPTER
FIGURE 3. WAS Base Mounting Bracket Installed
4. Align the hole in the WAS base mounting bracket (P/N 107-0172-455) with the hole in the differential housing.
5. Reinstall the differential housing bolt to secure the WAS mounting bracket.
FIGURE 4. Muffler Clamp Installed
6. Install the 2" muffler clamp (P/N 435-3003-055) on the machine's tie rod on the right side of the machine using
the supplied clamp hardware.
NOTE:
Do not fully tighten the muffler clamp. It will be adjusted later in the installation procedure.
32
Case IH MX 180-270, MFWD Axles - Model Year 1999-2002 SmarTrax™ Installation Manual