Raven SmarTrax Installation Manual page 45

Case ih mx 180-270, mfwd axles - model year 1999-2002

Hide thumbs Also See for SmarTrax:

Table of Contents

FIGURE 13. Valve Harness Routing

9. Route the valve harness along the right side of the machine's frame.

10. Route the valve harness to the front axle and over to the left side of the machine.

11. Secure the valve harness to the cylinder hose.

FIGURE 14. WAS Connection

12. Plug the WAS connector into the WAS installed on the axle of the machine.

IMPORTANT:

Ensure any excess cable is secured away from moving parts and heat sources.

P/N 016-5032-033 Rev. A

CAB COMPONENT INSTALLATION

Table of Contents