Chapter 4
Install a supplied tee fitting (P/N 333-0012-069) to the base of the steering cylinder and reconnect the
3.
existing hose to the installed tee fitting.
Steering Cylinder Connections
FIGURE 5.
Connect the supplied hose (P/N 214-1000-487) to the installed tee fitting and route to the 'A' port on the
4.
SmarTrax valve. A supplied elbow fitting (P/N 333-0012-042) may be installed on the SmarTrax block for
hose routing purposes.
Repeat step 1 through step 4 to connect the right steering cylinder to port 'B' on the SmarTrax valve using
5.
the supplied hose (P/N 214-1000-485).
Install the Pressure Switch
Install the steering override pressure switch (P/N 422-0000-074) on the 'PS' port of the SmarTrax valve.
Steering Override Pressure Switch
FIGURE 6.
14
Miller Condor SmarTrax Installation Manual