Raven SmarTrax Installation Manual page 16

Chapter 4
Existing Relief Valve Location
FIGURE 1.
Disconnect the existing pressure hose from the top of the relief valve.
2.
Install the supplied fitting (P/N 333-0012-070) to the hose disconnected in step 2.
3.
Connect the supplied hose (P/N 214-1000-069) to the installed fitting and route to the 'EF' port on the
4.
SmarTrax valve using the supplied 90° elbow fitting (P/N 333-0012-064).
SmarTrax Block Hydraulic Connections
FIGURE 2.
Hose from
Relief Valve
EF Port
Insert a supplied 90° elbow fitting (P/N 333-0012-067) to the port on the relief valve from which the hose
5.
was disconnected in step 2.
Connect the supplied hose (P/N 214-1000-069) to the installed elbow fitting and route to the 'P' port on the
6.
SmarTrax valve. A supplied elbow fitting (P/N 333-0012-064) may be installed on the SmarTrax block for
hose routing purposes.
12
Steering
Relief Valve
Miller Condor SmarTrax Installation Manual
Pressure
Connection