Raven SmarTrax Operation Manual page 61

Operational Problem
System disengages when
the auxiliary hydraulic
functions are operated.
Vehicle veers in one
direction while the
system engages.
Solution
1. Turn the Relief Valve in.
2. Turn the screw on the needle valve out.
3. Turn the screw on the pressure switch in.
1. Decrease the Line Acquire Aggressiveness.
2. Inspect the SPS and re calibrate if necessary.
3. Decrease the valve timing.
4. Check and confirm the minimum turning
radius and wheelbase of the vehicle.
5. Confirm that the lightbar swath and width and
offset settings are correct.
Manual #016-0159-956
5 5