Table of Contents
Advertisement
STEERING SYSTEM INSTALLATION | RAVEN EUROPE KIT INSTALLATION MTZ - BELARUS
1.2.5
WHEEL ANGLE SENSOR INSTALATION
Axle Type:
On MTZ tractors, 2 types of the axles are most
common, with back cylinder and front cylinder (Figure
18, Figure 19).
The most convenient place to install WAS located on
Front Left Axle. Turn the machines front wheels to the
right to access the left front axle.
TABLET 2: PARTS FOR WAS INSTALLATION
P/N
Description
063-8000-168
WAS ASY, BRCKT, 12V 180°, 35CM,
LONG ( Figure 20 )
117-8000-546
KIT, WAS LINK, M8 300, RAD-RAD
331-9000-022
EXHAUST CLAMP, M8, 38MM
107-0172-715
BRACKET, PLATE, U-BOLT, M8
107-8000-066
Hoeksensor bracket recht
Please note!:
At all times the triangles on the sensor housing
and sensor disc must be pointing in the same
direction!
Raven Industries Inc.
FIGURE 18 AXCEL WITH FRONT CYLINDER
FIGURE 19 AXCEL WITH BACK CYLINDER
FIGURE 20 WAS ASSEMBLY, BRACKET, 12V 180°, 35CM,
M12 CONNECTOR
PAGE 18/30 | Installation manual | 016-5035-065EN | Rev.
Advertisement
Table of Contents
