Install The Valve Harness - Raven SmarTrax Installation Manual

Secure the GPS INPUT FOR NON-STEERING SYSTEMS connector with plastic cable ties.
7.
Note:
The GPS INPUT FOR NON-STEERING SYSTEMS connector is not used in the SmarTrax
system.

Install the Valve Harness

Valve Harness Connection
FIGURE 8.
Connect the 12-pin connector of the valve harness (P/N 115-4001-227) to the mating connector of the
1.
machine's harness.
PVES Connection
FIGURE 9.
Connect the PVES connector to the open PVES port of the SmarTrax valve (P/N 334-0003-088).
2.
P/N 016-5031-005 Rev. B
Cab Component Installation
29