Raven SmarTrax Installation Manual page 28

Buhler versatile sx240/sx280

Hide thumbs Also See for SmarTrax:

Table of Contents

Chapter 4

Rotary Sensor Mounting Bracket Installed

FIGURE 3.

Install the rotary sensor mounting bracket (P/N 116-0159-745) on the mounting weldment using two 0.406"

ID x 0.812" OD x 0.065" flat washers (P/N 313-2300-014) and two 3/8"-16 nylon insert lock nuts (P/N 312-

4000-061).

Rotary Sensor Assembly Alignment

FIGURE 4.

Align the flat side of the shaft of the WAS (P/N 063-0181-024) with the cable exit point as shown in the

figure above.

Flat Side

of Shaft

Cable Exit

Point

Buhler Versatile SX240/SX280 SmarTrax™ Installation Manual

Table of Contents