OPTIMUM
M A S C H I N E N - G E R M A N Y
1.10
EMERGENCY-STOP push button
ATTENTION!
Also after actuating the
EMERGENCY-STOP switch,
the drilling spindle is turn-
ing - depending on the pre-
viously selected speed - for
a few seconds more.
1.11
Drilling table
Seats for T-slots are attached
to the drilling table.
WARNING!
Risk
of
injury
due
workpieces flying off at
high speed. Securely fix the
workpiece on the drilling
table.
1.12
Separating protective devices
1.12.1 Protective cover of the V-belts
A protective cover for the belt
pulleys is mounted on the drill-
ing head. A switch is integrated
in the protective cover which
monitors that the cover is
closed.
INFORMATION
You cannot start the machine if
the protective cover is not
closed.
GB
B24H | B24HV | B28H | B28HV
Page 14
EMERGENCY-
STOP push but-
ton
Img.1-2:
to
seats for clamping
blocks
Img.1-3:
Protective
cover
Img.1-4:
Original operating instructions
EMERGENCY-STOP B24H (Vario), B28H
(Vario)
Drilling table
Protective cover
Safety
Version 2.2.2 dated 2014-03-07