Table of Contents
Advertisement
OPTIMUM
M A S C H I N E N - G E R M A N Y
1.7
User positions
The operator position is in front of the drilling machine.
1.8
Safety devices
Use the drilling machine only with properly functioning safety devices. Stop the drilling machine
immediately, if a safety device fails or is faulty or becomes ineffective. It is your responsibility!
If a safety device has been activated or has failed, the drilling machine must only be used if you
the cause of the fault has been eliminated,
you have verified that there is no danger to personnel or objects.
1.9
EMERGENCY STOP push button
CAUTION!
The drilling spindle keeps turning for a short time even after actuating the EMERGENCY-
STOP push button depending on the preset speed.
1.10
Main switch
WARNING!
Dangerous voltage even if the main switch is switched off.
The areas marked by the pictogram might contain live parts, even if the main switch is
switched off.
In the "0" position, the main switch can be secured against accidental or non-authorised switch-
ing on. The power supply is interrupted by switching off the main plug.
1.11
Drilling table
Seats for T-slots are attached to the clamping table.
WARNING!
Risk of injury due to workpieces flying off at high speed. Securely fix the workpiece on
the drilling table.
GB
DX13V | DX15V
Page 8
Original operating instructions
Safety
Version 1.0.1 dated 2016-04-25
Hide quick links:
Advertisement
Table of Contents
