Decommissioning; Disposal Of The Packaging Of New Devices; Disposing Of The Old Device; Disposal Of Electrical And Electronic Components - Optimum Opti drill B 24H Operating Manual

9.5.1 Decommissioning

CAUTION!
Used devices need to be decommissioned in a professional way in order to avoid later
misuses and endangerment of the environment or persons.

Disconnect the machine from the mains.

Cut the connection cable.

Remove all environmentally hazardous operating fluids from the used device.

If applicable remove batteries and accumulators.

Disassemble the machine if required into easy-to-handle and reusable assemblies
and component parts.

Supply the machine components and operating fluids to the provided disposal
routes.

9.5.2 Disposal of the packaging of new devices

All used packaging materials and packaging aids of the machine are recyclable and generally
need to be supplied to the material reuse.
The packaging wood can be supplied to the disposal or the reuse.
Any packaging components made of cardboard box can be chopped up and supplied to the
waste paper collection.
The films are made of polyethylene (PE) and the cushion parts are made of polystyrene (PS).
These materials can be reused after reconditioning if they are forwarded to a collection station
or to the appropriate waste management enterprise.
Only forward the packaging materials correctly sorted to allow a direct reuse.

9.5.3 Disposing of the old device

INFORMATION
Please make sure in your own interest and in the interest of the environment that all component
parts of the machine will be disposed of in the provided and admitted ways.
Please note that the electrical devices include lots of reusable materials as well as environmen-
tally hazardous components. Account for separate and professional disposal of the component
parts. In case of doubt, please contact your municipal waste management. If appropriate, call
on the help of a specialist waste disposal company for the treatment of the material.

9.5.4 Disposal of electrical and electronic components

Please make sure that electrical components are disposed of in a professional way according
to the legal requirements.
The device includes electric and electronic components and must not be disposed of with the
rubbish. According to the European directive 2002/96/EG regarding electrical and electronic
used devices and the execution of national rights used electrical tools and electrical machines
need to be collected separately and be supplied to an environmentally compatible reuse.
Being the machine operator you should obtain information regarding the authorized collection
or disposal system which applies for your company.
Please make sure that the batteries and/or accumulators are disposed of in a professional way
according to the legal regulations. Please only throw discharged batteries in the collection
boxes in shops or at municipal waste management companies.
Appendix
Version 2.2.2 dated 2014-03-07 Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
B24H | B24HV | B28H | B28HV GB
Page 93