Intended Use - Optimum Opti drill B 24H Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
1.2

Intended use

WARNING!
In the event of intended use of the drilling machine

will endanger personnel,

the machine and other material property of the operating company will be endan-
gered,
the correct function of the drilling machine may be affected.
The drilling machine is designed and manufactured to be used in a non-explosive environment.
The is designed and manufactured for holes in cold metals or other non flammable materials or
that not constitute a health hazard using a rotating filing-stripping tool that has a number of
grooves for collecting the filings.
If the drilling machine is used in any way other than described above, modified without the
approval of the company Optimum Maschinen Germany GmbH then the drilling machine is
being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that you

observe the limits of the drilling machine,

the operating manual is observed,

the inspection and maintenance instructions are observed.

"Technical data" on page 18
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alternations to the operation values of the
drilling machine! They could endanger the staff and cause damage to the drilling
machine.
INFORMATION
The drilling machine B24HV and B28HV is built according to the standard DIN EN 55011 class
A.
WARNING!
The class A (machine tools) is not intended to be used in residential facilities, where the
power is supplied via a public low voltage supply system. In these areas it may possibly
be difficult to guarantee electromagnetic compatibility due to lead bound as well as
emitted interferences.
ATTENTION!
If the drilling machine is not used as intended or if the safety directives or the operating
instructions are ignored the liability of the manufacturer for any damages to persons or
objects resulting hereof is excluded and the claim under guarantee is becoming null and
avoid!
GB B24H | B24HV | B28H | B28HV
Page 8 Original operating instructions
Safety
Version 2.2.2 dated 2014-03-07