Installation; Fixing - Optimum Opti drill B 24H Operating Manual

3.6

Installation


Check the horizontal orientation of the base of the drilling machine with a spirit level.

Check that the foundation has sufficient floor-load capacity and rigidity.

Place the drilling machine on the provided underground.

Fix the drilling machine in the provided through-holes on the machine foot.
WARNING!
The condition of the underground and the fixing type of the machine foot to the
underground must be in a way that it can bear the loads of the drilling machine. The
underground must be level. Check the horizontal orientation of the base of the drilling
machine with a spirit level.

3.6.1 Fixing

In order to provide for the necessary stability of the drilling machine,
it is necessary to firmly bolt the base of the machine to the subsurface.
We recommend you to use shear connector cartridges resp. heavy-duty anchors.

Fix the foot of the drilling machine
to the substructure with the pro-
vided through-holes.
The Through-bore are marked
with arrows on the machine base.
Assembly
Version 2.2.2 dated 2014-03-07
Through-
bore
Arrow sign
Img.3-8: Labeling of the anchorage points on drilling
machineB24H- B24HV
Arrow sign
Through-bore
Img.3-9: Labeling of the anchorage points on drilling
machine B28H - B28HV
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
B24H | B24HV | B28H | B28HV GB
Page 31